2Flute Spiral Solid Carbide Tapper Ballnose For 3D Carving CNC Router Bit – Sharav Corporation

सॉलिड कार्बाइड स्पाइरल टैपर बॉलनोज़

1.  टैपर बॉलनोज़ एक विशेष काटने का उपकरण है जो सटीक लकड़ी के काम के लिए डिज़ाइन किया गया है, विशेष रूप से 3 डी नक्काशी और सीएनसी मशीनिंग के क्षेत्र में। इस उपकरण में एक गेंद जैसा गोलाकार टिप होता है, जो विभिन्न गहराई और स्तरों के बीच चिकनी रूपरेखा और क्रमिक संक्रमण की अनुमति देता है। उपकरण का पतला आकार उपकरण के निशान को कम करने और नक्काशी संचालन के दौरान उच्च परिशुद्धता सुनिश्चित करने के लिए आवश्यक है।

सॉलिड कार्बाइड स्पाइरल टैपर बॉलनोज़
सॉलिड कार्बाइड स्पाइरल टैपर बॉलनोज़

 

2.  लकड़ी के अनुप्रयोगों में, विशेष रूप से जटिल डिजाइनों और घुमावदार सतहों के साथ काम करते समय, टेपर्ड बॉलनोज़ एंड मिल एक अमूल्य संपत्ति साबित होती है। विस्तृत बनावट और जटिल ज्यामिति बनाने की इसकी क्षमता इसे पारंपरिक सीधे-धार वाले उपकरणों से अलग करती है। लकड़ी पर नक्काशी परियोजनाओं में उच्च स्तर के विवरण और कलात्मक अभिव्यक्ति प्राप्त करने का प्रयास करते समय यह उपकरण विशेष रूप से उपयोगी होता है

3.  टैपर बॉलनोज़ धातु, प्लास्टिक और लकड़ी सहित विभिन्न सामग्रियों पर जटिल 3डी आकार और रूपरेखा बनाने के लिए आदर्श है। वे जटिल वक्रों का अनुसरण कर सकते हैं और चिकनी, गोल सतह बना सकते हैं।

4.  इन उपकरणों का उपयोग अक्सर वर्कपीस पर टेक्स्ट, लोगो या सजावटी पैटर्न उकेरने के लिए किया जाता है। पतला आकार बारीक विवरण और नुकीले कोनों की अनुमति देता है।

5.  टैपर बॉलनोज़  मोल्ड और डाई बनाने में मूल्यवान है, जहां वे कास्टिंग और फॉर्मिंग ऑपरेशन के लिए सटीक और चिकनी गुहाएं या मोल्ड प्राप्त करने में मदद करते हैं। ये उपकरण बहुमुखी हैं और प्लास्टिक और लकड़ी सहित विभिन्न सामग्रियों पर काम कर सकते हैं।

 

How to Use a Tapered Ball Nose Bit for Wood Carving on a CNC Router

A tapper ball nose bit is ideal for detailed 3D carving, relief work, and intricate designs on wood. The tapered shape provides strength and precision, making it suitable for deep and fine cuts.

  1. Choose the Right Tapper Ball Nose Bit

Tapered ball nose bits come in various sizes and angles. Selecting the right one depends on the level of detail and depth needed:

  • Small Radius (0.25mm – 1mm) → For fine details and intricate patterns.
  • Medium Radius (1mm – 3mm) → For general 3D carving and relief work.
  • Large Radius (3mm – 6mm) → For deep carving and large surface smoothing.
  • Taper Angles (5°, 7°, 10°) → Smaller angles for detailed work, larger angles for rough carving.
  1. Prepare Your CNC Router
  • Secure the Wood – Use clamps or a vacuum table to prevent movement.
  • Set the Zero Point (Home Position) – Align the bit properly with the workpiece surface.
  • Install the Bit Correctly – Insert the tapered ball nose bit securely into the collet and tighten it.
  1. Set Up Toolpaths in CAM Software
  • Use 3D toolpath strategies like Raster, Parallel, or Contour in software such as VCarve, Aspire, Fusion 360, or ArtCAM.
  • Roughing Pass: First, use a larger bit (flat or ball nose) to remove excess material.
  • Finishing Pass: Use the tapered ball nose bit to refine the details.

Recommended Toolpath Settings

Bit SizeSpindle Speed (RPM)Feed Rate (IPM)Step Over (%)Depth Per Pass
0.25mm18,000 – 24,00050 – 805 – 10%0.05 – 0.1″
1mm16,000 – 22,00080 – 1208 – 12%0.1 – 0.15″
3mm14,000 – 18,000120 – 20010 – 15%0.2 – 0.3″
  1. Run a Test Cut
  • Perform a small test to check accuracy and surface finish.
  • Adjust the feed rate, step-over, and depth per pass if necessary.
  1. Monitor the Cutting Process
  • Ensure smooth chip evacuation (use dust collection if needed).
  • Avoid burning or chipping by adjusting speed and feed rates.
  • Listen for unusual sounds indicating excessive pressure or dull bits.
  1. Post-Processing & Finishing
  • Light sanding with high-grit sandpaper (400-800 grit) for a smooth finish.
  • Apply stain, paint, or clear coat for enhanced appearance and durability.

Would you like tool recommendations or software settings for a specific project?

Product CodeCutting Dia
MM
Cutting Length
MM
Sank
MM
Total Length
MM
TB-125125650
TB-225225650
TB-325325650
TB-425425650
TB-235235675
TB-335335675
TB-435435675
TB-3503506/8100
TB-4504506/8100

Google  –

https://photos.app.goo.gl/Vj5mYHVAt3QyZKRW7

https://photos.app.goo.gl/AsW31mUrRZ2VpEND8

https://photos.app.goo.gl/CbFoR4tZtDdqtxjFA

 

YouTube   –  https://youtu.be/M6vsHoNHxOo